Double Glazing Door Lock Repairs

Are your uPVC door or window mechanism not working properly? Perhaps the handles on your uPVC windows and doors aren't aligned correctly or are difficult to use.

It is crucial that the double glazed doors operate smoothly, otherwise you'll be wasting energy and increase the chance of burglary. Owen the Locksmith can fix your door lock at a reasonable price.

Snapped Key

It can be frustrating when a key is snapped inside a lock. This can also be a security problem because it could expose you to an intruder if the door is not locked. There are a few quick fixes you can try to fix the problem and get your door working again.

Remember to remain calm. If you panic you could end up pushing the damaged key further into the lock.

Spray WD-40, or any other penetrating lubricant, into the lock. This will assist the broken piece come out more easily. You can also make use of a screwdriver to break up any pieces stuck that could be blocking the way. If you have a piece of the key that's stuck, double glazing repair grab it with the help of a paperclip or any other thin metal object and pull it. Both methods work well, however, be careful not to push the damaged piece of the key further into the keyway.

Some paperclips have grooved edges that can be used as hook extractors. Jigsaw blades are also well for this. If you don't happen to have one of these tools you can bend a hook with needle-nosed pliers. Additionally, a pair of tweezers can be used to grasp and pull out the last part of the broken key.

If you're unable to pull the broken piece of key out, try using a lock de-icer. It is available in most hardware stores and works by freezing any moisture that may be present inside the lock.

If none of these strategies are working you, it's time to call locksmith. Fitlocks experts can fix issues such as broken handles and snapped keys with uPVC locks and door mechanisms. They can also modify your double glazing door mechanisms to allow them to operate more easily. Book a double glazing repair through us online or give us a phone call to discuss your requirements.

Broken Cylinder

A broken cylinder can be an extremely risky security issue. A professional locksmith can easily repair the cylinder. To fix the cylinder, locksmiths will need to tap it. This can be done using a hammer or other tool. However, the most effective method is to employ a wire or long match. Then, place the end of the match or wire in the keyway. The locksmith can then strike the lock in order to crack it. This is better than using a hammer that could damage the lock.

Overheating is the most common reason for cylinder heads to crack. This can occur when the cylinder block and head are made from different metals, like cast iron and aluminum. Different metals can heat up and cool down at different rates. This could cause localized hotspots to expand faster than the rest.

Another reason that could cause cylinder cracks is corrosion. If the cylinder head and cylinder block are not maintained properly, this could lead to rusting or double glazing repair corrosion and cause them to expand at a higher rate than they ought to. This can lead to cracks as time passes.

If your uPVC window or door lock is stiff and requires a lot of pressure to turn it could be due to a variety of reasons. This can result from a defective locking mechanism, or misalignment and also a worn out handle.

This is a simple and cost-effective fix that a majority of homeowners with double glazing can perform. A professional locksmith will typically be able solve this issue within a matter of hours of arriving at your property. They can repair the locking mechanisms, or change the window handles and change the gearboxes, depending on your particular requirements. A professional locksmith will always be able advise you on the most cost-effective options for your home. They may suggest upgrading to 3 Star TS007 Euro Cylinders which offer an additional layer of protection against burglars. It's a small price to pay for the security that comes from knowing your upvc repair doors are secure.

Broken Handle

It's not a surprise that window handle locks may break. They have intricate mechanisms which deteriorate over time. It can be difficult to determine the reason behind the problem and then fix it properly.

Fixing the broken handle, whether it's an internal latch or locking mechanism will increase the security of your uPVC door and prevent draughts. It can be expensive to repair or replace your handle incorrectly and it can also damage the frame and the lock of your door.

With the window open then loosen the screw that secures the handle with a screwdriver. The screw should be on the inside of the backplate, which is usually concealed by an eye-catching cap to conceal it for aesthetic purposes. You should not lose any internal components of the handle, such as the levers and plates on either side. Ideally, keep them in the same order so you can replace them when needed.

Then, with another screwdriver, loosen the screw that holds the handle to the spindle in the back. Once the screw is free, you can pull the handle out and remove the broken spindle. Replace it with a brand new spindle, ensuring that it's the same length (you can purchase them online or at hardware stores). Securely screw it into the correct position. Don't over tighten the screw as this could damage the handle and the window frame.

Close the handle and test it. It should work smoothly and you'll be able to open your window once more.

Be sure to double-check that your uPVC window is closing properly while you're working with the handle. If they're not closing correctly, you could encounter draughts or damp in your home. Also, you could be compromising the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges on the window frames to ensure that they close correctly.

Broken Spindle

It is more common for the spindle to break rather than the handle. This is most common in uPVC tilt-and-turn windows. These windows require a handle that acts as an electronic locking mechanism within the window frame. The handle is attached to a central rod that activates a series of cams with a mushroom shape that lock into the window frame keep. If the dead latch mechanism fails to open when the handle is turned, it is most likely the spindle is damaged. This could be a problem that is frustrating.

Fortunately there are ways to fix this problem. A skilled locksmith can quickly and efficiently fix this problem. They can disassemble the window handle by using a tool that removes the wheel part of the mechanism, where the spindle goes. This can be done with no damage to the handle or window frame.

Once the wheel has been removed the technician can then inspect the spindle to determine what has caused it to break. This involves breaking the spindle into its individual parts and meticulously noting their general condition, as in addition to any specific areas of wear or damage. This process is typically performed in a clean environment by skilled technicians.

The next step is to clean the damaged spindle. This will help remove any debris or dirt that could be hindering it from functioning normally. The spindle could then be repaired or replaced. If the technician is replacing the spindle he can use a dowel that is comparable in size to the original. The technician will then drill matching holes into both pieces. This ensures that the new spindle is precisely matched to the handle.

If the damaged spindle cannot be repaired, it could need to be replaced entirely. Home centers offer generic replacements but if the style of your window is unique then it is necessary to find a woodworker or cabinet maker who can replicate the exact part for you. Once the spindle has been installed, it can be fixed to the handle. Line up the screw holes on the handle to the screws that are already in the frame. Once the new handle is in place, you'll be able to operate your uPVC window.