Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they do not get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home, and could even be fatal. You should take the time to ensure that your windows are in good shape.

For single pane windows, it is fairly easy to replace them, and the replacement will generally fit within the frame that was previously installed easily. However, if you have double pane windows that are anchored by internal beading, it will be more difficult to remove the existing panes and install new ones. In this instance it is essential to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass by yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes so that any shards fall onto the fabric, not onto the floor, where they could be trampled under.

It's a great idea tape the gap once the glass is removed. This will keep water and drafts from entering your home until a professional is able to fix the window. It also acts as an obstruction to prevent criminals from getting into your home. If the distance between the door and the window is significant, you may prefer an alarm system that includes an opening. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can be affected by a variety of issues that include sliding. A sagging uPVC windows can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from becoming worse.

To fix a window that is sagging you can try repositioning the hinges. To accomplish this, you'll need open the window so that you can get to the frame. Then, using the screwdriver, you'll be able to unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you've relocated your hinges. If you're satisfied with the size of the window, tighten the screws to secure them in place.

If you are unable to reposition the hinges you may require replacing the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to lose tightness. It is important to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles may also become loose. Most often, this is caused by screws that have come loose over time. However, it can be due to the fact that the handle mechanism has worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need to shut the window and do an initial fitting. The joints at the corners of the sash must align with the joint on the casing. If it isn't, you can use a screwdriver to loosen the handle, and then reverse the mechanism back into position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home and also affect your ability to regulate the temperature in your home. Most often, upvc repairs near me window leaks are caused by damaged or missing sealant.

This is a simple fix that can be done by any DIYer who is competent. Depending on how serious the issue is, old caulking may have to be removed. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to apply too much caulk and then make the area more difficult to clean and could reduce the efficiency of your energy.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more serious situations, you might have to consider replacing the window.

Moldy sills and rotten ones are another sign of water leakage. The fungus thrives in damp conditions and Window Doctor Near Me can quickly spread across the house.

It is also important to note that if the leakage is coming from between the glass in your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. It is also possible to be corrected by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or if it opens in a breeze. They can be repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Like any mechanical part, hinges can be damaged over time. It is very easy to replace a hinge on a window but it's much easier if someone helps you to hold the frame.

Make sure that the uPVC hinges are closed and open in the correct direction. You can check this by checking for the arrows on each hinge, this indicates the direction in which the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window in a particular way or by improper installation in the factory. Sending us a photo via our website is often enough to resolve the problem. We are happy to offer assistance.

Regularly lubricating the hinges is essential. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window doctor near me easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. The ideal time to do this once a year. WD40 or other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a variety of various factors. The hinges can also become misaligned due to wear, causing a gap where the sash meets frame. These can be easily repaired by giving them a good cleaning, but when they're beyond repair, it may be necessary to get them realigned or replaced. The interlock, which is located on the hinge of the window, may also become misaligned, again it is possible to give them a thorough clean, however in certain cases, it may be necessary to get them replaced.

The second most frequent reason for draughts are the window seals. They can become worn down or damaged over time and will allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glasses. This will help regulate indoor temperatures, and reduce draughts.

The final method to cut down on drafts effectively is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler that can be placed over your window sill. These will keep your home warm by blocking cold air.

Your upvc windows can remain a great source of insulation and security for your home with a little regular maintenance and repairs. It is crucial to realize that all windows have a life span and there may come an point at which it is more cost-effective to replace them rather than fix them. If you have any problems with your upvc window it is recommended to speak with a professional as soon as possible.