Repairs to uPVC Windows

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. They do not get rotten or rusty like aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will save you from costly repairs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home, and could even be fatal. It is essential to make sure that your windows are in good working order.

For single pane windows it can be relatively simple to replace them, and the replacement will generally fit within the frame that was previously installed easily. However when windows with double panes are held in place by internal beading it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this case you'll need to find some plastic spacers that aid the new pane in being able to fit properly into the frame of the window.

If you're planning attempt to remove the glass panes yourself, it is essential to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. It is also a good idea to lay down a drop cloth before you begin working on the glass to ensure that any shards fall onto the fabric instead of onto the floor where they can be trodden under and cause further damage.

Once the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional comes out and fix the window. It also acts as an obstacle to stop intruders from making their way into your home. If the distance between the door and the window is large, you might want to use security screens that has a window. This will provide the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. However, over time they are susceptible to a range of issues like sliding. A sagging window repair near me can cause problems with light, draughts, and even security. It's important to take action when you realize that your upvc window repair windows are falling down.

Repositioning the hinges could aid in fixing a window which is sagging. First, you'll need to open the windows to access the frame. With the screwdriver, you'll be able to unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and test it for fit. If you're happy with the fit, you can tighten the screws to ensure that they stay in the right place.

If you cannot reposition the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes them to loosen. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and safe from drafts.

uPVC handles could also loosen. The majority of the time, this is caused by screws that have become loose over time. However, it can also happen because the handle mechanism has been worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need to shut the window and do an initial fitting. The joint at the corners of the sash must align with the joint on the casing. If it does not then you can use the screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature of your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix that can be completed by any skilled DIYer. Depending on how severe the issue is, the old caulking may have to be removed. It is important to keep in mind that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area more difficult to clean and could decrease the efficiency of your energy usage.

It is important to check that any drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more severe cases, you may need to replace the window.

Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and is able to quickly spread throughout the home.

If the leakage occurs between the double-glazed glass, it is more likely the problem is with the seal rather than the frame. This can be easily repaired by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open, or if it blows open with the breeze. They can be easily replaced by any competent DIYer and can usually be completed in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that have hinges and, like all mechanical parts, they will wear out over time. It's very simple to change a window hinge however it is easier if someone else helps you to hold the frame.

Make sure that the uPVC hinges open and close in the right direction. You can check this by checking for the arrows on each hinge, this indicates the direction in which the window should open.

Window hinges that aren't working properly could be the result of incorrectly opening the window a certain way or due to improper installation in the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be more than happy to give you advice.

Regularly lubricating hinges is also essential. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the possibility of a window sticking and help prevent corrosion. This is recommended to be done at least every year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by different things. The hinges may also become unbalanced due to wear, causing gaps between the frame and sash. These can be easily repaired by giving them good clean, but when they're beyond repair, it may be necessary to get them re-aligned or replaced. Secondly the interlock, this is on the hinge side of the window and can also become misaligned, again it's feasible to give them a clean but in some instances it could be necessary to have them replaced.

The next common reason for draughts are the window seals. They are prone to wear or damaged over time, and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help control indoor temperatures and lessen the risk of draughts.

Another, and most effective methods to reduce draughts is by using an draught excluder. These are typically made of fabric that are filled with some type of filler. They can be positioned on the windowsill on top. They can keep your home warm by blocking cold air.

The windows made of upvc can keep providing excellent insulation and security for your home with a little regular maintenance and repairs. It is crucial to recognize that windows last for a certain period of time and there may come the point when it's more economical to replace them than repair them. So, if you're experiencing issues with your Upvc windows, it's best to seek professional assistance immediately.