Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are long-lasting, durable and easy to maintain. They do not decay or rust as aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will save you from costly repairs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, making it very dangerous and potentially fatal. It is important to take the time to ensure that you're doing all you can to ensure that your windows are in good shape.

For single pane windows it is relatively easy to replace them, and the replacement will generally fit within the frame of the previous one easily. However when you have double-pane windows that are secured by internal beading, it'll be more difficult to take out the old panes and put in new ones. In this situation, it is necessary to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you plan to attempt to remove the glass panes yourself, it is essential to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes so that any shards fall on the fabric and not onto the floor which could cause them to be trampled.

It's a great idea seal the gap after the glass has been removed. This will keep drafts and water from entering your home until a professional comes out to repair the window. This also serves as an obstruction to prevent intruders from making their way into your home. If the gap between the window and the door is substantial, you may prefer an alarm system that has a window. This will provide the best of both.

2. Sagging

uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. As time passes, they may develop a variety of issues that include sagging. A window that is sagging can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from becoming worse.

To fix a sagging window you can try to reposition the hinges. First, you'll need to open the windows to reach the frame. Then, using the screwdriver, you'll be able to take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and test it for fitting. If you are happy with the fit of the window, you can tighten screws to hold them in the right position.

If you are unable to reposition the hinges, you may have to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to lose their tightness. If this happens, it's crucial to replace the seal as soon as possible so that your uPVC windows are watertight and draught-proof.

upvc window repairs near me handles could also loosen. The majority of the time this is due to screws that have come loose over time. However, it could occur because the handle mechanism has worn out. Fortunately, it's easy to fix the loose uPVC window handle yourself. First, you'll need to close the Window repair and do an experiment fitting. The joints at the corners of the sash must align with the joint on the casing. If it doesn't then you can make use of a screwdriver to loosen the handle and then turn the mechanism back into its original position.

3. Water Leaks

If you awake to wet floors and damp walls every time it rains it's important to take action. Water leaks from windows can not only cause destruction of your home's structure but also hinder your efforts to regulate the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or missing.

This is a simple fix that can be accomplished by any DIYer who is competent. Depending on the severity of the issue the old caulking might need to be removed before a fresh layer can be put on. It is important to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.

Verify that the drainage holes do not have debris inside them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more severe cases, you may need to replace the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely the problem is with the seal rather than the frame. It is also possible to be corrected by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or it blows open with an ease. They can be easily repaired by any skilled DIYer and can usually be completed in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that are hinged and like any mechanical part they will wear out over time. The process of replacing a hinge on a window is essentially a simple process, but it's simpler with someone else to assist in holding the frame up.

Check that the uPVC hinges are open and closed in the correct direction. You can do this by checking for the arrows on each hinge. This indicates which way the window should open.

The problem can be caused by opening the window incorrectly or a faulty installation in the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be pleased to offer you suggestions.

It is also essential to grease the hinges on a regular basis. Applying a light engineering lubricant to the hinges is a great way to do this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It also helps prevent corrosion and reduce the risk of sticking. It is recommended to do this at least once a year. WD40 or other solvent-based oils are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges may also become misaligned due to wear, creating gaps where the sash meets frame. If they are damaged beyond repair, it might be necessary to have them realigned. Secondly the interlock, this is on the hinge side of the window, may also be misaligned, and again it is possible to just give them a thorough clean, however in some cases it might be necessary to have them replaced.

The seals may wear out or become damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass. which will help regulate indoor temperatures and again will reduce the possibility of draughts.

The final method to cut down on the amount of draughts is to use a Draught-excluder. These are typically fabric tubes filled with a filler which can be placed over your window sill. These will keep your home warm by blocking cold air.

Your windows made of upvc will remain a great source of insulation and security to your home with regular maintenance and repairs. However, it is important to recognise that all windows have a life span and eventually, they will reach an point at which it is more efficient to replace them than repair them. If you are experiencing issues with your upvc window it is recommended to speak with a professional as soon as possible.