Tilt and Slide Patio Door Repairs Near Me

If you love hosting guests or simply enjoying the outdoors, patio doors are a convenient way to move from indoors to out. If your patio door isn't sliding smoothly, you may need to alter it.

Remove the plugs made of plastic and locate the screws for adjusting on the bottom rail to raise or lower your door. Make sure the door is level and smoothly moving (Photo 1).

Window Treatments

Take into consideration privacy, light control and aesthetics when selecting window treatments for sliding doors. Do you want to block sunlight from shining onto your furniture or artwork? Or would you prefer that sunlight only enters when the sun is low enough in the sky.

The type of window treatment you select can also create a more custom appearance. For example, if your sliding patio door is a single pane of glass, you can add mullions to separate it into multiple smaller panes of glass to create an elegant appearance. Window treatments can be made of soft or hard materials. They include everything from drapes, curtains and valances, to cellular shades or roller shades, as well as wooden shades that are woven. They can be used alone or in combination with other window coverings like a swag.

One of the most well-known kinds of window treatments for patio doors is vertical blinds with wide fabric panels called vanes that can be closed and open and allow you to regulate the amount of light that enters your home. They can be operated with a wand or a chain and cord.

Another alternative for sliding patio doors is window films that offer the ability to control glare and energy consumption. They can be added to your sliding door or used as an alternative to window treatments, for example an cellular shade.

For a more traditional appearance you may want to consider an swag or valance to cover your sliding door. They come in a variety of fabrics and colors, and in traditional tabs, pinch pleats and grommet designs. You can even get them with a blackout liner for additional privacy and control of light.

Keep in mind that patio doors must be able to slide open and close. It is recommended to hang window treatments at a height to allow them to perform this task. This will ensure that they are out of reach for children and pets.

If your window treatments aren't in the form a valance or have no rod pocket, you can install the traverse bar to allow them to slide horizontally across your sliding door. Be sure to hang them a quarter of an inch above the top of your patio doors to prevent the heads of brushing through.

Rollers

If your patio door starts to squeak it is most likely to be due to worn rollers. The rollers are located at the bottom of the doors to allow them to glide easily along a track. They could be stuck or simply get rusty over time. This can make it difficult for you to open and close the doors and cause loud noises when in motion. There are few things that can help you repair your sliding doors so that they can open and close smoothly.

The first thing to try is to grease the tracks. This will make the door move more easily and should be done two times a year. You can purchase a quality lubricant at your local patio door repairs hardware shop. Use an oil made of silicone if have tracks made of vinyl and a wax-based grease if you have wooden ones. If the lubricant isn't working, you may need to replace your rollers.

You can also adjust the rollers. This is a two person job because you need to raise the door and locate the plastic adjustment screws at the bottom of the track. They are fitted with a small plug which needs to be removed with the help of a screwdriver. Then, you can turn the screws to raise or lower the rollers, allowing the door to come into contact with a smaller portion of the track.

Another possibility is that the doors are not aligned properly in the track. This can cause a gap between the frame and door and result in cold air coming in on a cold winter day or hot air escaping out on a hot day. If this is the situation, you will need to remove the door and frame to determine what's causing it to split.

If the gap was caused by the track you can fix it by removing the upper part of the track. Then, screw it back in place. Installing new tracks could also repair the gap, and give the door something to rest on when it is in use.

Tracks

If the doors aren't opening or closing easily, it may be time to lubricate the tracks. It's a simple job that will enhance the performance of your patio doors.

Remove the door and place it on a flat surface out of the way as you work. If the door is heavy, it may be necessary to have another person help you lift and hold it while you work. With a brush and soapy water, thoroughly clean the track of the sliding door. Vacuum the blinds between the glass of your sliding doors.

For Next Dimension vinyl patio doors dirt and dust can accumulate near the tilt and raise/lower operators which can cause problems for the operation. If your door has these, make sure to regularly clean the surface with a solution of vinegar and water or a regular window cleaner.

Signature and Pro patio door include an antilift block in their head pockets. They require an opening of 3-6 inches to remove this feature and lower the sill track. Slide the sash/panel into an open position, then lift it up to tilt it towards the back. This will open the sill pocket to allow the track to lower away from the head jamb. Repeat the procedure for both sides the panel or sash.

Glass

If your glass for the patio door is damaged, it could cause a number of issues. It may block sunlight from coming into the home, and can cause the space to be unusable until the glass is replaced. Glass that is cracked can be hazardous, as it could shatter and cause injuries to someone hit in the head with shards.

Fortunately, it's fairly easy to repair damaged doors and frames. The first step is to clean the glass and get rid of any dust or dirt that has built up over time. After cleaning the glass you can apply a clear coating to shield it from the elements. You can also apply an attractive film to the door to enhance its privacy and aesthetic.

If your sliding glass door isn't moving smoothly, it may be due to an improperly aligned roller. The adjustment screws are located on the bottom of your door. They could be covered by caps for trim. If you're unable to locate the screws, you can try lifting or lower the door until it appears even on the track.

Be sure to have all the tools you need before you start repairing a sliding door. You'll also require an awl and a screwdriver, as well as some caulk or plastic putty. You'll also need to move any furniture away from the door so that you can work on it quickly. You can also place blankets or foam sheets under the door to protect it against scratches when you remove and replace it.

Our engineers will determine the name of the manufacturer as soon as they arrive on the job site. You can do this by removing the covers on the rollers (bogies) which are found at the bottom of the door. You can also look for a label inside the side panel or on the handle. If you are unable to locate the label, the best option is to contact the manufacturer directly.