How to Replace a UPVC Window Handle

If your upvc window handle is broken, don't panic. Replacing a upvc window handle is an easy task and can be completed in a matter of a few steps.

It doesn't matter if you have an in-line or a cranked window handle each one has an oval spindle protruding out of the back plate. The spindle is fitted into the locking device.

Determine the type of lock and handle

Over time, window handles and locks can become damaged or lose their functionality. The good thing is that this issue can often be repaired without replacing the entire uPVC window unit. One of the first things you need to do is identify the type of lock and handle you have, as this will determine the replacement parts you will need.

Identifying the kind of handle can be identified by looking at the handle's base. A screw or pin is what holds the handle to its base. If the screw is not present, this can be an indication that the handle has broken off from its base section. If the handle is broken internally and does not hold onto the spindle anymore, it may also be a sign that the handle needs to be replaced.

There are a variety of uPVC handles that are available, but the Espag handle is the most well-known. They are usually secured by two bolts and feature a spindle that engages the lock mechanism within the frame of the window. These handles are used on uPVC tilt and turn windows.

Cockspur handles are another type of uPVC handle. They are similar to the Espag handle, however they have a lower projection from the frame. These handles are usually used on older upvc window handle replacement windows.

Additionally, there are Venetian window handles that are similar to the Espag handle, but have an elongated base that allows them to be fitted flush with the frame. These handles are a great option for homeowners who want an elegant handle that can blend with their uPVC frames. They are also available in a broad variety of colors to match any decor.

Find the spindle's measurement.

Before ordering a new handle, it's essential to understand how the previous one is connected. This will tell you if it's too tight or loose and if it will fit into the window frame. This can be done by identifying the handle's type and determining the spindle's measurement. The spindle is a metal shaft that connects your handle to the lock inside the window frame. The spindle is available in various sizes. The current standard for the industry is 8mm. Older handles could have a cross-section of 9mm so you'll have to measure your old handle to ensure you get the correct size replacement.

There are many kinds of window handles, however the most commonly used are inline Espagnolette and Cockspur handles. These handles are used to operate a locking system inside the window. They utilize shootbolt rods to secure the window when it is shut. Depending on the type of handle they are held in place using screws or pins.

You can buy Upvc handles replacement on the internet or at most DIY stores. They come in a range of finishes and are suitable for both new and replacement windows. They can also be key-locking or fire-escape non-locking for extra security.

To remove your old handle, open the window and remove the screws that hold it in place. Be careful not to cause damage to the screws and place them in a container for later use. After the screws have been removed, remove them carefully from the handle. Take a measurement of the distance from the base of the spindle to the top. This will provide you with the information necessary to purchase the right replacement. The handle's spindle is the metal shaft that connects it to the lock gearbox within the window frame.

Remove the handle that was previously used

Changing a uPVC window handle is an easy task that typically requires less than five minutes with the proper tools. The first step is to identify the kind of lock and handle that will help you find the correct replacement. After that, weighing the spindle will make sure that the new handle is a perfect fit. Finally, you'll need to remove the old handle and replace it with the new one.

The majority of uPVC handles have inline Espagnolette handles. These handles have an internal spindle that slots into the locking mechanism on the window. They are usually easy to remove, but you may have to apply force when they're stuck. There are typically two screws that keep the handle in place, which can be removed with the help of pliers or a screwdriver. It is also possible to remove pins, depending on the type of handle.

Once the screws are removed, you can pull off the old handle. When the handle is opened and the top of the baseplate should be visible. This will reveal two screws that can be removed. There's also a small silver or other color sticker that must be removed if it's in place.

With the screws that came off the handle, you are now able to screw the new handle into place. The screw holes should be aligned on the window to the holes in the handle. After this is done, you can replace the caps on the screws and then test the new handle to confirm that it works properly. The replacement of a uPVC window could be a simple and quick task, but it's crucial to ensure you complete the task correctly.

Replace the handle with a new one.

It's time to put in your new handle if you have successfully removed the old handle from the frame. Begin by locating the screw covers and then lifting them out using your screwdriver. Once they are removed, put them in a secure place and proceed to the next step.

Then screw the spindle in by aligning it with the hole that is already in place. Be sure to align the holes of the handle with the holes in the window frame. Also, use a screw similar in length to the ones previously used or it could cause the handle to not being secure.

The uPVC Espag handle comes equipped with a spindle of 7mm square which turns the lock mechanism of the window. This kind of handle can be commonly found in modern uPVC windows. uPVC Cockspur (also known as the name Cotswold) handles feature an extended, curving nose that is secured to the outer frame or cross member of the transom bar. They are usually found on older uPVC windows.

It is essential to lock and [Redirect-301] unlock the window a few times after the handle has been put in place. If everything is in order then your new uPVC window handle should now be securely attached and operating smoothly. If you have any problems, these steps will help you identify the issue and fix it quickly. Bridgewater Glass can help you when you're experiencing issues with your uPVC handles or any other home improvement that is glazed. Our glaziers have been trained to repair or replace a variety of window handles and frames making us a good option for your double glazing requirements.

Test the new handle

Over time, the handles of uPVC can become damaged and worn out. They can become less secure and efficient, so it is important to replace them as soon as you can. It's also recommended to do this when you upgrade your windows, because changing the handle and lock will maintain the integrity of the windows you have just bought.

There are a variety of uPVC window handles. Some are attached by pins or screws while others have blades which fit into the lock mechanism. Each type has a distinct way to replace it, and you'll need to know which type you have.

The most popular kind of window handle is called the espag. They're typically used on newer uPVC Windows. These handles come with a spindle that extends out from the handle and into the gearbox of the lock, and when you open the window it triggers the locking mechanism. They're also simple to remove however, you must take care not to damage the mechanism or the handle while taking them off.

Cockspur window handles are another popular choice for uPVC windows. The locking mechanism is activated when the window is closed or tilted. A spur is attached to the wedge-shaped striker plates on the frame. This type of handle is more difficult to repair than other types however, it's still an ideal choice for many homes.

Venetian handles are connected to the frame by two bolts and they have a low projection on the frame. This differs from the Espag handle. They are ideal if you need an elegant flush handle that blends in with your uPVC windows. They're an excellent choice for commercial and residential properties.