Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to get rotten or rusty like aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home, and could even be fatal. It is essential to ensure that your windows are in good working order.

For single pane windows it is relatively easy to replace them, and the replacement will usually fit inside the old frame very easily. However when windows with double panes are held in place by internal beading it will be more difficult to take out the panes that are in place and replace them with new ones. In this case it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is essential for anyone who plans to remove the glass yourself. It is also an excellent idea to lay down a drop cloth before you start working on the glass to ensure that any fragments of glass fall on the fabric instead of landing on the floor where they can be trodden under and cause further damage.

Once the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to stop water and drafts from entering the property until a professional is able to come out and repair the window. This also serves as a barrier to prevent any intruders from making their way into your home. If the gap between the door and the window is large, you might prefer an alarm system that has windows. This will provide the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. However, over time, they can suffer from a variety of issues, including sagging. A sagging uPVC window can cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it's important to act quickly to prevent the problem from getting worse.

To fix a window that is sagging you can try to reposition the hinges. To accomplish this, you'll need open the window to access the frame. You can then unscrew both the top and bottom hinges using a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close the window and verify the fitting. If you're satisfied with the fit, tighten the screws to ensure they stay in position.

If you are unable to reposition the hinges, you might require replacing the seal. Rubber seals can dry out and lose their elasticity over time, causing them to lose their tightness. It is crucial to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. This is typically caused by screws that have been removed over time, but it could be due to the handle mechanism getting worn out. Fortunately, it's easy to repair a loose upvc door repairs near me window handle yourself. First, you'll need to close the window and perform an initial fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can use a screwdriver to loosen the handle and then turn the mechanism back into its original position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains it's important to take action. The leaks of water through windows could cause structural damage to your home, and hinder your ability to control the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be accomplished by any DIYer who is competent. Depending on how serious the issue is, old caulking may need to be removed. It is essential to keep in mind that when it is about uPVC window repairs, do not be tempted to apply too much caulk' as this will only make the area more difficult to clean and can reduce your energy efficiency.

Verify that the drainage holes do not have debris inside them and ensure that the sill pan has been angled correctly to drain away from the window. In more severe cases, you may need to replace the window.

Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. The is a fungus that thrives in damp conditions and can quickly spread throughout the house.

It is also important to note that if the leakage is coming from between the glass in your double glazing repairs glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open in a breeze it could be hinges that are at fault. They can be easily repaired by any DIYer who is skilled and are usually done within a few minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. The process of replacing a hinge on a window is an easy process but it can be easier when you have a person to assist in holding the frame up.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. You can check this by looking for the arrows on each hinge, this indicates the direction in which the window should be opened.

The issue could be caused either due to opening the window in the wrong way or due to a poor installation in the factory. It is usually possible to fix the issue by sending us a picture via our website and we will be pleased to offer you suggestions.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more easily. It also decreases the chance of windows getting stuck and stop corrosion. The ideal time to do this once a year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. First, the hinges due to wear and tear may become displaced, which can cause a gap to form where the sash meets the frame. If they are damaged beyond repair, it could be necessary to have them realigned. The interlock, which is located on the hinge of the window, may also be misaligned, and again it is feasible to give them a clean but in some instances it could be necessary to have them replaced.

The seals may wear out or become damaged over time, allowing air to escape. Installing high-quality weatherstripping is a good way to prevent draughts. Another option is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures and will lessen the possibility of draughts.

Lastly, one of the most effective methods to reduce drafts is to use an draught excluder. These are usually fabric tubes filled with some kind of filler. They can be positioned on top of your windowsill. They will help stop cold air from entering and keep your home warm and cozy!

Your windows made of upvc will remain a great source of insulation and security in your home with regular maintenance and repairs. However, it is important to realize that all windows have a lifespan and there may come an point at which it is more economical to replace them than repair them. So, if you're experiencing issues with your Upvc windows, fitting it is recommended to seek help from a professional as soon as you can.