Replacement Handles For UPVC Windows

UPVC window handles come in various styles but all use the same locking mechanism. To replace a uPVC handle, remove the top screw from the bottom of the window handle. This will reveal two more screws.

Then, take measurements of the spindle to ensure your new handle will fit. It is important to know what kind of a handle you have because there are a variety of sizes.

Inline Espagnolette Handles

The majority of double-glazed windows feature Espagnolette handles which operate multi-point locks for improved security. The handle is operated by an 7mm square spindle which connects to a gearbox inside the frame of the window. This gearbox moves the multi-lock mushrooms when the handle is turned. They come in a variety including cranked, inline key locking and cockspur handle, and they are also available as a set to replace a single handle that is broken or worn out.

Our uPVC replacement handles for upvc windows handle kits are designed to make it simple to replace a damaged or defective window handle with a espagnolette. These uPVC handle sets are packed with a variety of spindle lengths suitable for the majority of applications. They also come with all the fixing screws required for installation included. These handles also come with key-plugs which allow them to be switched from the standard open/closed handles to fire escape or egress locking handles (if they are fitted with the appropriate key plug).

If you are just looking for an espagnolette handle that can simply replace your existing window handles without changing the position of the mushroom plates, we recommend our Simplefit Inline Espag Handle with 3 Spindles. These handles are designed specifically for this purpose and they come ready to fit with a range of spindle lengths already inserted so you don't need to worry about cutting them down on site. The handles are also a good choice for new build or refurbishment projects due to their excellent value and easy installation.

Another alternative is our Yale Sparta 2 Inline Espag Handle that was created to have minimal aesthetic intrusion with a reduced base height. It is part of the suitable hardware range and comes with a variety of finishes that comply with the specifications of BS EN1670:2007 Grade 5. They have also been tested for endurance and are suitable for use in coastal environments as well as with acidic timbers. They can be used with key-locking inserts that cylinder-immobilise when needed.

Cockspur Handles

Most often found often on older uPVC and aluminium windows, cockspur handles are a simple catch and latch. The handle's nose slides into or into the catch which is a block of plastic mounted on the window frame. Because the wedges are available in various sizes, it is essential that you know what step height to purchase before buying a new handle. In general, uPVC windows tend to use a 21mm step size and Replacement Handles For UPVC Windows aluminum frames typically have a 9mm handle step.

A cockspur handle can be secured with a key, providing added security for your home. The lock is fitted into the handle using spindles, which fit into the handle through the lock hole (also called a backset). The spindle is 7mm square in cross section and can be used to either open or close the window.

It is crucial to ensure that the new cockspur handle is the same height of the original. This is typically measured from the base spur of the handle to the underside of handle nose. This measurement is also known as the stack height or backset and it is essential that you know this before you purchase a handle.

Cockspur handles can be straight/universal or cranked. They are available in left hand or right handed versions. This is to allow the handles to be positioned on left or right opening windows and to allow the operator easier access to the window.

Find out if your window requires a restrictor. This is designed to prevent the handle from being opened beyond a certain level. These are usually required for high-rise apartments or commercial buildings for safety reasons. However, the majority of domestic homes don't require them.

There are a variety of styles and colors of cockspur handles including stainless steel and white uPVC steel. Choosing the best one for your windows will be based on your personal taste and style, as well as how you want the window to perform.

Tilt and Turn Handles

The UK is home to a variety of double-glazed windows featuring tilt and turn handles. They are found on both upvc and timber windows. The handle is generally positioned at 90 degrees, however it can also be turned to 180 degrees. This allows the window to be fully opened to the room and be lowered to allow to let in air. The handle is locked in this position and requires a key to unlock it in the event of a need.

This kind of handle is able to be replaced since it only has one big handle, and not several smaller ones. This improves the overall appearance of the handle and is more in keeping with the latest minimalist design trends. In addition they are also much easier to clean than casement windows as the window opens inwards and is cleanable on both sides.

They are also 4 to 8 times stronger than casement window. This makes them ideal for larger windows and doors. The frames are also made of steel, which adds strength and durability.

The tilt-and-turn mechanism is also more secure than a casement, because the handle is locked in any position. This is especially important in areas that have children, as it prevents children from opening windows.

Many homes choose tilt and turn windows as they can be used in a variety of ways. They can be opened horizontally like a regular window, dropped down in a hopper fashion for ventilation or tilted inwards for cleaning and maintenance. This is an excellent option for those who wish to increase the airflow in their home and can also aid in noise reduction. They are also easy to clean and maintain, because the glass is easily removed. You can find these windows in a wide range of sizes and colours. These windows are ideal for any house, and can complement both modern and traditional styles.

Crank Handles

Crank handles require minimal effort to open, and provide a stunning view of the outdoors without obstructing the glass. They're commonly used in casement windows that hinge on the sides, or awning windows. They have mechanisms that are similar to a window bar and linkage arm, which is used to support the window sash. The window sash is opened or closed when you turn the handle clockwise. In contrast to other types of handles, a crank window's mechanism and handle are usually subject to a significant amount of wear and tear that can cause the gears strip and the handle to cease working or fall off of the operator shaft. Monitoring the handle and the mechanism of the operator regularly will ensure that they are in good condition for many years to come.

A crank handle is composed of a mechanical shaft that rotates perpendicularly and is attached to an arm. The arm is rotated in a circular manner by grabbing it and turning it, similar to how you operate a sharpener. In certain situations the handle could be operated by the leg.

The base of the crank handle is hollow. This hole allows the handle to be connected to machinery and equipment. The handle's arm features an attaching bar that transforms the circular motion of the handle into rotary and reciprocating motions to operate machines and equipment.

Boats are usually transported on trailers using crank handles, in addition to machines and equipment that can be adjusted. They're typically made of stainless steel that is resistant to corrosion in marine environments. Because of this, most boat crank handles are powder coated to protect them from damage and to make them easier to clean.

If your crank handle isn't working or won't open the window, it might be time to replace it. Find the trim mounting screws in the window frame's track. If there aren't any, try to loosen the casement cover using a rigid putty knife by sliding it between the window jamb as well as the frame and pulling it. If that doesn't work, you can remove the cover and access the crank mechanism by uncreasing the screws inside the window frame.