Ghost Immobiliser Installation

Add a ghost immobiliser to your vehicle to protect it from thieves. Our TASSA verified system protects vehicles against hacking, key cloning and immobiliser bypassing.

The system is hidden within your vehicle's wiring loom It is invisible to anyone who looks. It works by creating the pin code push sequence through buttons already present on the steering wheel doors, door cards, and the center console.

No circuit cuts

It's not surprising that owners are concerned about protecting the car they've put so much effort into buying. However, traditional security devices like alarms and wheel locks could easily be cut off or jumped by thieves. Ghost immobilisers on the other hand is a highly efficient solution that is silent and isn't easily detected by modern thieves.

Ghost immobilisers is also known as a hidden device is a device that communicates with your vehicle's data network CAN to disable the engine. It does this without using key fobs or radio frequencies. It communicates with your vehicle's ECU through existing buttons on the steering wheel, dash and door panels to create an unique pin code that you only can access. The code can be altered at any time and can have up to 20 digits depending on your preferences. It also comes with a safe emergency code you can use should you forget your PIN.

The ghost immobiliser can also be useful to prevent the relay box at your home from transmitting the signal of your car key, which will unlock the doors and start your vehicle. It can also block advanced methods of stealing your vehicle, like OBD port hacking. The device is small and weatherproof, so it's difficult to see and is even more difficult to interfere with.

The ghost immobiliser has another advantage: it is able to be installed in your vehicle without leaving permanent marks. It's ideal for those who are planning to sell their vehicle in the near future. It's also quicker and easier to install when compared to a factory-fitted model.

The Autowatch Ghost, a revolutionary technology, is a new generation device that prevents thefts from cars that are not connected to a vehicle's CAN network and using the buttons to generate a unique PIN code. This is a stealthy device that can be installed without cutting wires and does not require any additional key fobs. It is also connected to the vehicle's original ECU and prevents thieves from gaining access to it using an additional key or replacing the ECU with a "relay". This system is TASSA verified and can be connected to an International Security Register, allowing owners to have peace of mind knowing that their vehicles are protected against theft.

No scanning by RF

If you have invested an enormous amount of time and money in the customization of your vehicle, you'll need to secure it from theft. One of the best ways to accomplish this is to install an immobiliser, which will stop your engine from running until you enter a unique PIN. You can generate a 20-digit code using the buttons on your dashboard and steering wheel. This will ensure that only you are able to drive your car. You can also set up a valet or service mode that will allow you temporarily to start your vehicle without entering the PIN code. This will permit your technician to work on your vehicle without your presence. This is a great feature for people who are looking to save time and make their lives easier.

Ghost immobilisers are next generation device that connects to your vehicle's CAN data network, and uses the buttons on the dashboard and steering wheel to program a unique PIN code. It is designed to be discrete without any LED indicator or noise to make it obvious and can be placed anywhere on the vehicle without impacting the look of your pride and joy.

This stealthy system is TASSA approved and could reduce the cost of insurance. It also has the ability to track that can track your vehicle even if it has been stolen. This is especially useful for those who own a unique expensive car ghost immobiliser which you've invested many hours customizing.

Autowatch Ghost, Ghost Immobiliser Installation in conjunction with the iPhone app allows you to remotely start your car in the event that you've forgotten your PIN number or are unable get into your vehicle. This feature is great for those who need to collect your kids or run errands but don't want the safety of someone else driving your car. This feature is useful when you need to take your car in for service or repair.

The Ghost has the advantage that it does not transmit or detect radio frequencies which means it's not detected by thieves who employ RF scanning and code grabbing techniques. It can also protect your car against key cloning and ECU swapping as well as other common methods of car theft.

No key to cloning

Ghost immobilisers are a fantastic option for protecting expensive vehicles and are designed to prevent key cloning. They stop your car from being started until a PIN code has been entered along with the standard key fob. This makes it more difficult for thieves to steal the vehicle, and can stop them from trying. This is a good idea in the event that your vehicle has been heavily modified or ghost immobiliser installation is rare.

The immobilisers are connected to the vehicle's CAN data network and are completely hidden, which means that their presence isn't visible. It is also difficult to detect by using radio frequency scanning technology or code grabbing. This means that a criminal must spend much longer to steal your car.

A criminal will need to be aware of the pin code and the exact location of the ghost in order to avoid it. The pin code is unique to you and can change it as many times as you want. The pin code you select is simple to remember, however, it is mathematically impossible for anyone else to understand. The engineer will also have provided an emergency pin number in case you forget the pin.

The Ghost CAN bus immobiliser is weatherproof, and can be installed in any location of your vehicle. It can be used with any vehicle and can be fully customizable to match your car's style. It is also very easy to use and affordable. You can even transfer the device to a different vehicle if you decide to change vehicles during the course of ownership, provided that the new vehicle is compatible with the.

The CAN bus is compatible with other security features. It could, for instance, detect damage to the vehicle and notify the owner. It could also stop the engine if the car is damaged. The system also protects your vehicle from key cloning and hacking. It also detects vibrations or contact with the vehicle. It can also alert the owner if the vehicle is moving.

No OBD port hacking

Ghost uses an immobiliser hidden in the module that is connected to the CAN data network of your vehicle which prevents a thief from hacking into your car to disable the alarm, or deactivate the key fob and code new keys. This technology is a major improvement over the traditional methods used by thieves in the past to steal your vehicle. The CAN data network also means that the system won't be affected by disconnecting or changing the battery.

The Autowatch ghost immobiliser for sale, the first non-detectable CAN bus immobiliser aftermarket in the world, protects against key-cloning, hacking, and replica car theft. It works without LED indications or key-fobs, instead leveraging the buttons in your steering wheel, centre console and door panels to allow you to create a unique PIN sequence (up to 20 button presses) which must be entered before you can drive your vehicle away.

Modern thieves utilize diagnostics to identify circuit breaks on your vehicle. They can bypass immobilisers which require a lot of wiring or are integrated in the wiring. The Ghost is weatherproof and doesn't require any additional wiring. It is not able to be detected by professional diagnosis tools. It can even be installed on vehicles that are fitted with anti-theft equipment.

Another major benefit of the Ghost immobiliser is that your vehicle is only able to be started by someone who knows the PIN code and has physical access to your car. This is an advantage over security systems that can be tampered with by simple screwdrivers or cable tampering.

You can easily reset your PIN if you forget it using the emergency PIN override feature on a computer or mobile phone. This is a great option in the event that you have to start your car when it's been left in a garage or at the valet parking service.

The Autowatch Ghost 2 is the latest generation of the product and is approved for insurance by TASSA when installed by one of our authorised installers. It features the QR fingerprint system to identify specific parts that allow for the return of stolen items if they are found. It can also be set to'service mode' which permits the engine to start when your vehicle is in a garage or if you have valet parking, however, you'll need to enter your PIN code once more to exit the car.