How to Replace upvc window handle a UPVC Window Handle

If your upvc window handle is damaged, don't be concerned. Replacing a window handle made from upvc is an easy task and can be completed in just a few steps.

If you have a cranked or inline espagnolette window handle, they all come with a square spindle bar that extends from the back plate and is slotted into the locking mechanism.

Find out the type and the size of the handle and lock.

Over time, window handles or locks can become damaged and lose their function. The good news is that this can often be fixed without having to replace the entire window unit made of uPVC. One of the first things to do is determine the type of handle and lock you have, as this will determine what parts will be required for replacement.

You can determine the type of handle by looking at its base. There is an anchoring screw or pin that holds the handle to its base. If the screw is gone, it could be an indication that the handle has separated from the base section. If the handle has split internally and is no longer able to grip the spindle, this could also indicate that it needs replacing.

There are a number of different types of uPVC window handles, but the most common is the Espag handle. They are usually secured with two bolts and the spindle is connected to the locking mechanism in the frame of the window. These handles are typically used on uPVC tilt and turn windows.

Another kind of uPVC window handle is the Cockspur handle. They are similar to the Espag handle, but they are a little further from the frame. These handles are typically used on older uPVC window frames.

Additionally, there are Venetian window handles, which are similar to the Espag handle, but they have flat bases that allow them to be positioned to the frame. These handles are a great choice for homeowners looking for an elegant handle that will be a perfect match with their uPVC frames. The handles are also available in a large range of colours to match any decor.

Measure the spindle

It is crucial to be aware of how the handle installed before you can order the replacement. This will tell you how it is tight or loose and if it can fit correctly into the window frame. This can be determined by identifying the handle type and measuring the spindle. The spindle is a metal shaft that connects the handle to the lock inside the window frame. The spindle is available in a variety of sizes. The current industry standard is 8mm. Older handles may have a cross-section of 9mm, therefore you'll need to take measurements of your old handle to ensure you get the right size replacement.

There are a variety of window handles, but the most common are inline Espagnolette and Cockspur handles. These handles are operated by an locking mechanism within the window with shootbolt rods that secure the window when it is closed. Depending on the type of handle they are secured in place by pins or screws.

You can find replacement handles for windows made of upvc online and in a lot of DIY stores. They are available in various finishes, and are suitable for windows that are new or replacement sash windows. They can also be key-locking or fire-escape non-locking for additional security.

To take off the handle just open the window towards the door and remove all the screws holding it in place. Store the screws in a container to prevent damage. Once the screws are removed, remove them carefully from the handle. Measure the distance from the base of the spindle to its tip. This will give you the necessary information to purchase the correct replacement. The spindle of the handle is the iron shaft that connects it to the gearbox that locks the window frame.

Remove the old handle

The replacement of the handle of an uPVC handle is a straightforward job that takes less than five minutes if you've got the proper tools. The first step is to determine the kind of lock and handle that will help you identify the right replacement. After that, measuring the spindle will ensure that the new handle is a suitable to the existing one. Then, you'll have to remove the old handle and replace it with the new one.

The majority of uPVC handles are inline Espagnolette handles, which have an integral spindle that slots into the locking mechanism of the window. They are usually easy to remove, however you may have to apply force when they're stuck. The handle is usually secured by two screws which can be removed with a screwdriver. Depending on the kind of handle, you might also need to remove the pins that hold it in place.

After removing the screws you can then remove the handle you were using previously. The top of the base plate will be visible once the handle is in the open position, showing two screws that you can remove. If the sticker is still visible, you'll have to remove it.

Utilizing the screws from the handle, you are now able to screw the new handle into the appropriate position. Make sure that the screw holes are aligned on the window to the holes in the handle. After you've done this, replace the screw caps. Test the new handle. It's simple to swap a uPVC, Replace upvc window handle but you must do it right.

Fit the new handle

It's time to install your new handle if you've successfully removed the old handle from the frame. Begin by locating and removing the screws with your screwdriver. After they've been removed, put them in a secure place and proceed to the next step.

Next, place the new spindle inside the handle by aligning it with the hole already in place and screwing it in. Be sure to align the holes in the handle with those in the window frame. You should use a screw that is identical to the one used before, or it could cause the handle to not being secure.

The uPVC Espag handle is equipped with a spindle that is 7mm square that rotates the lock mechanism on the window. This type of handle can be present in the majority of modern uPVC windows. uPVC Cockspur (also known by the name Cotswold) handles feature an extended, curved nose that locks onto the frame's outer edge or cross member of the transom bar. They are often found on older uPVC Windows.

It's important to lock and unlock the window handles replacement several times after the handle has been put in place. If everything is in order then your new uPVC window handle should be secure and functioning smoothly. If not, the above steps will help you identify any issues and get it fixed quickly. If you're having trouble with your uPVC handle or any other problems with your glazed home improvement, don't hesitate to contact us at Bridgewater Glass for professional assistance. Our glaziers are trained to repair or replace windows with a variety of handles and frames, making us an excellent choice for your double-glazing requirements.

Test the new handle

Over time, the handles of uPVC can become damaged and worn out. This can make them less secure and effective, so it is important to replace them as soon as you can. This is also a great option to consider when you upgrade your windows. Changing the handle and locking mechanism will ensure the integrity of your new windows.

There are a variety of styles of uPVC window handles. Some are fixed by screws or pins, while others have blades that slide into the lock mechanism. Each lock type has its own method of replacing it, so you need to know which one you own.

The most popular kind of window handle is the espag. They're typically found on the latest uPVC Windows. The spindle extends from the handle into the lock gearbox and triggers the locking system when you open the window. They're also simple to remove however, you must be careful not to damage the mechanism or the handle when doing so.

Cockspur handles are another alternative to uPVC window handles. They're secured with a spur that hooks onto the striker plate in the shape of a wedge on the frame, and when you close or tilt the window, it triggers the locking mechanism. This type of handle is more difficult to fix than other kinds, but it's still an ideal choice for many homes.

Venetian handles are joined to the frame by two bolts and they have a low projection on the frame. This is different from the Espag handle. These handles are great when you want to have a flush handle which blends into uPVC window frames. They're a great choice for commercial and residential buildings.